Amplifier Pride Uno
We present to you the Uno series from Pride, single-channel subwoofer amplifiers with Korean circuitry.
The line includes 3 models, such as UNO, UNO PLUS and UNO XL with a power of 400, 700 and 1200 W with a distortion of 5% and a load of 1 ohm. On board three models there is an external level control with indications of amplifier operation and overload (Klipp).
The Korean circuit gives us increased stability in operation than Chinese models, and also retains good rich bass.
“1 channel power amplifier Pride UNO 400W. Suitable for subwoofer up to 400 Watts RMS.
Subwoofer monoblock D class Pride Uno.
Stable on a 1 ohm load. 400 W power per 1 Ohm load, at a voltage of 14.4 volts and a non-linear distortion coefficient (hereinafter K.N.I) at 5%, which is the norm for a subwoofer unit. The remote control of the input sensitivity level has an LED indicator for exceeding the threshold of permissible distortions. The power amplifier is not designed to operate in “bridge mode”
Range of reproduced frequencies, Hz 15 – 270
RMS rated power of 1 ohm, number of channels x W 400
RMS rated power of 2 ohms, number of channels x W 280
RMS rated power at 4 ohms, number of channels x W 160
The quality and stability of the UNO line makes the amplifiers an excellent choice.”
 
Technical feature
1 Ohm Power400 W
2 Ohm Power280 W
4 Ohm Power160 W
Frequency Response15Hz – 270 Hz
Signal to Noise85 dB
Efficiency @ 4ohmOver 90%
Damping Factor> 200
Input Sensitivity8V-0,3V
Subsonic Filter10 Hz – 50 Hz
Bass Boost0-9 dB
Remote Control with indication of exceeding the distortionIncluded
Low Pass Filter35 Hz – 250 Hz
Strap ConnectionNo
Fuse Rating40 А
Physical feature
Length160 mm
Height53 mm
Width220 mm
ColorBlack