Amplifiers Pride Rapid
The best circuit design option, developed on the basis of production in South Korea. Works stably at a load of 1 Ohm. Power 1800 W per 1 Ohm load, at a voltage of 14.8 volts and K.N.I. at a level of ~5%, which is the norm for the subwoofer section. The remote control of the input sensitivity level has an LED indicator that the permissible distortion threshold has been exceeded. Possible operation in “bridge switching” mode”
Pride Rapid Stable at 1 ohm load. Power 1800 W for a load of 1 Ohm, at a voltage of 14.8 volts and K.N.I. ~ 5%, which is the norm for the subwoofer link.
The remote control of the input sensitivity level has an LED indicator for exceeding the threshold of permissible distortions.
Possible to work in the mode of “bridge inclusion”
Pride Rapid Can work in both bridge mode and array mode (link).
Without fear, it is possible to connect to a load with a resistance of 0.5 Ohms if it is a subwoofer speaker whose DC resistance of the voice coils is not lower than the indicated mark.
Range of reproduced frequencies, Hz 15 – 270
RMS rated power in 1 Ohm, number of channels x W 1 x 1800
RMS rated power of 2 ohms, number of channels x W 1 x 1100
RMS rated power of 4 ohms, number of channels x W 1 x 650
Developed and designed on the basis of Korean Circuitry with the completion of Russian engineers.
Excellent solution for powerful subwoofers and high-quality sound for many years of work.
Buy it now and enjoy the power of sound by Pride Car Audio!
Technical feature
1 Ohm Power1800 W
2 Ohm Power1100 W
4 Ohm Power650 W
Frequency Response15Hz – 270 Hz
Signal to Noise85 dB
Efficiency @ 4ohmOver 90%
Damping Factor> 200
Input Sensitivity6V-0,2V
Subsonic Filter10 Hz – 50 Hz
Bass Boost0-9 dB
Remote Control with indication of exceeding the distortionIncluded
Low Pass Filter35 Hz – 250 Hz
Phase0-180 degree
Strap ConnectionYes
Fuse Rating150 A
Physical feature
Length350 mm
Height66 mm
Width220 mm
ColorBlack
top of page
$568.00Price
Excluding Sales Tax |
RELATED PRODUCTS
bottom of page